BRDZR - 2584 ALKALINITY CONTROL
- MSDS: BRDZR
- Manufacturer: NALCO
- Product Name: 2584 ALKALINITY CONTROL
- National Stock Number: 6850-00N038453
Product Identification
Product ID:2584 ALKALINITY CONTROL
MSDS Date:07/25/1991
FSC:6850
NIIN:00N038453
MSDS Number: BRDZR
Responsible Party
NAPERVILLE, IL 60566
US
Emergency Phone: 708-920-1510
Info Phone: 708-961-9500
Preparer: RICKY A. STACKHOUS
Cage: FO908
Contractor
Telephone: (630) 305-1000
Cage: 89524
Ingredients
(ORAL,RAT) 205 MG/KG
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 20-40%
OSHA PEL 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
(ORAL,RAT) 1,260
CAS: 1310-58-3
RTECS: TT2100000
Fraction By Weight: 10-20%
OSHA PEL 2 MG/M3, C
ACGIH TLV: 2 MG/M3, C
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
HEAT, SPLATTERING OR BOILING AND THE
RTECS: 9999999ZZ
ZINC, AND ZINC ALLOYS.
RTECS: 9999999ZZ
IF
RTECS: 9999999ZZ
PROBABLE
RTECS: 9999999ZZ
MEASURES AGAINST CIRCULATORY SHOCK, RESPIRATORY
RTECS: 9999999ZZ
NITRILE, PVC, NATURAL RUBBER, VITON AND BUTYL)
RTECS: 9999999ZZ
SLICKER SUIT IS RECOMMENDED IF GROSS
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:CORROSIVE TO EYES W/POSSIBLE
PERMANENT DMG DEPENDING ON THE LENGTH OF EXPOSURE & ON THE FIRST
AID ACTION GIVEN. SKIN: CORROSIVE TO THE SKIN. POSSIBLY RESULTING
IN THIRD DEGREE BURNS DEPENDING ON T HE LENGTH OF EXPOSURE AND ON
THE FIRST AID ACTION GIVEN. INGEST: CAN BE HARMFUL. CAN CAUSE
BURNS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INHALATION: CAN BE CORROSIVE TO THE
MUCOUS MEMBRANES AND THE LUNGS. A REVIEW OF AVAIALABLE DATA DOES
NOT IDENTIFY ANY SYMPTOMS FROM EXPOSURE NOT PREVIOUSLY MENTIONED.
Medical Cond Aggravated by Exposure:A REVIEW OF AVAILABLE DATA DOES NOT
IDENTIFY ANY WORSENING OF EXISTING CONDITIONS.
First Aid
First Aid:EYES:IMMED FLUSH FOR @ LST 15 MIN WHILE HOLDING EYELIDS OPEN.
CALL MD AT ONCE. SKIN:IMMED FLUSH W/WATER FOR @ LST 15 MIN. FOR A
LRG SPLASH, FLOOD BODY UNDER SHOWER. CALL MD AT ONCE. INGEST:DO NOT
INDU CE VOMITING. GIVE WATER. CALL MD @ ONCE. INHAL:REMOVE TO FRESH
AIR. TREAT SYMPTOMS. CALL MD. NOTE TO MD: BASED ON THE INDIVIDUAL
RXNS OF THE PATIENT, THE MD'S JUDGEMENT SHLD BE USED TO CTRL (ING
6)
Fire Fighting
Flash Point:NONE
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CONTACT WITH REACTIVE METALS MAY RESULT
IN THE GENERATION OF FLAMMABLE HYDROGEN GAS.
Accidental Release
Spill Release Procedures:SML: CNTN W/ABSORB MATL, SUCH AS CLAY,
SOIL/ANY COMMERCIALLY AVAIL ABSORBENT. SHOVEL RECLAIMED LIQUID &
ABSORB INTO RECOVERY OR SALVAGE DRUMS FOR DISPOSAL. REFER TO CERCLA
IN SECT 14. LRG SPILL: DIKE TO PVNT FURTHER MOVEMENT & RECLAIM
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT GET IN EYE/SKIN/CLTHG. DO NOT
TAKE INTERNALLY. EMPTY CNTNRS MAY CONTAIN RESIDUAL PROD. DO NOT
REUSE CNTNR UNLESS PROPER RECONDITIONED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IF IT IS POSS TO GENERATE SIGNIFICANT LEVLES OF
MIST, A NIOSH/MSHA APPRVD OR EQUIVALENT DUST RESP IS RECOMMENDED.
FOR LRG SPILLS, ENTRY INTO LARGE TANKS, VESSELS OR ENCLOSED SML
SPACES W/INADEQ VENT, A NIOSH/MSHA APPRVD PRESS- (SUPP DATA)
Ventilation:GENERAL VENTILATION IS RECOMMENDED.
Protective Gloves:IMPERMEABLE GLOVES (NEOPRENE, (ING 9)
Eye Protection:CHEM WORK GOGG&FULL LENGTH FSHLD .
Other Protective Equipment:THE AVAILABILITY OF AN EYE WASH FOUNTAIN AND
SAFETY SHOWER IS RECOMMENDED. WEAR IMPERMEABLE BOOTS & APRON. (ING
10)
Work Hygienic Practices:IF CLTHG IS CONTAM, REMOVE CLTHG & THORO WASH
THE AFFECTED AREA. LAUNDER CONTAM CLTHG BEFORE REUSE.
Supplemental Safety and Health
SPILL PROC: INTO RECOVERY OR SALVAGE DRUMS OR TANK TRUCK FOR DISPOSAL.
REFER TO CERCLA IN SECTION 14. WASTE DISP METH: INDUSTRIAL WASTE
LANDFILL. A HAZ LIQUID WASTE CAN ALSO BE DEEP-WELL INJECTED IN A
CCORDANCE WITH LOCAL, STATE AND FEDERALREGULATIONS. RESP PROT:
DEMAND, SCBA IS RECOMMENDED.
Chemical Properties
Vapor Density:12.5
Spec Gravity:1.5 @ 70F
pH:14
Solubility in Water:COMPLETELY
Appearance and Odor:COLORLESS LIQUID. NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CNTCT W/STRONG ACIDS (SULFURIC, PHOSPHORIC, NITRIC, HYDROCHLORIC,
CHROMIC, SULFONIC) WHICH CAN GENERATE (ING 4)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:IF THIS PROD BECOMES A WASTE, IT MEETS CRITERIA
OF A HAZ WASTE AS DEFINED UNDER THE RCRA 40 CFR 261. HAZ WASTE
D002. AS A HAZ LIQ WASTE, IT MUST BE SOLIDIFIED W/STABILIZING
AGENTS SO THAT NO FREE LIQ REMAINS BEFORE DISP TO LICENSED (SUPP
DATA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.